Inheritance diagram for Adafruit_ADS1115:

Collaboration diagram for Adafruit_ADS1115:

Public Member Functions
	Adafruit_ADS1115 (uint8_t i2cAddress=ADS1015_ADDRESS)
	Instantiates a new ADS1115 class w/appropriate properties.

Public Member Functions inherited from Adafruit_ADS1015
	Adafruit_ADS1015 (uint8_t i2cAddress=ADS1015_ADDRESS)
	Instantiates a new ADS1015 class w/appropriate properties.

void	begin (void)
	Sets up the HW (reads coefficients values, etc.)

uint16_t	readADC_SingleEnded (uint8_t channel)
	Gets a single-ended ADC reading from the specified channel.

int16_t	readADC_Differential_0_1 (void)
	Reads the conversion results, measuring the voltage difference between the P (AIN0) and N (AIN1) input. Generates a signed value since the difference can be either positive or negative.

int16_t	readADC_Differential_2_3 (void)
	Reads the conversion results, measuring the voltage difference between the P (AIN2) and N (AIN3) input. Generates a signed value since the difference can be either positive or negative.

void	startComparator_SingleEnded (uint8_t channel, int16_t threshold)
	Sets up the comparator to operate in basic mode, causing the ALERT/RDY pin to assert (go from high to low) when the ADC value exceeds the specified threshold.

int16_t	getLastConversionResults ()
	In order to clear the comparator, we need to read the conversion results. This function reads the last conversion results without changing the config value.

void	setGain (adsGain_t gain)
	Sets the gain and input voltage range.

adsGain_t	getGain (void)
	Gets a gain and input voltage range.

Additional Inherited Members
Protected Attributes inherited from Adafruit_ADS1015
uint8_t	m_i2cAddress

uint8_t	m_conversionDelay

uint8_t	m_bitShift

adsGain_t	m_gain

The documentation for this class was generated from the following files:

Public Member Functions

Additional Inherited Members